PFT HM 2002
![](https://moutsilakisgr6bbda.zapwp.com/q:u/r:0/wp:1/w:1/u:https://moutsilakis.gr/wp-content/uploads/2021/06/PFT-HM-2002-900x900.jpg)
![](https://moutsilakisgr6bbda.zapwp.com/q:u/r:0/wp:1/w:1/u:https://moutsilakis.gr/wp-content/uploads/2021/06/PFT-HM-2006-1-900x900.jpg)
The horizontal PFT continuous mixers of the HM series – also known as mortar mixers – continuously and fully automatically mix all cement-based dry mortars (e.g. masonry mortar, joint mortar, leveling compounds, adhesive / reinforcement mortar) into a ready-to-use material. The machine is characterized by all-round qualities, easy handling and a maintenance-friendly belt drive. Depending on the series version, the continuous mixers can be used either only with bagged goods or optionally with bagged or silo goods or only with silo goods. The HM 2002 version is a continuous mixer for bagged goods. It is equipped with a rubber mixing tube and has an integrated control with a solenoid valve. The machine is suitable for all premixed dry mortars up to a maximum grain size of 4 mm.
- Low filling height
- Secured quick release
- Maintenance-free square outer bearing
- Rubber mixing tube
- Ideally suited for processing adhesive mortar
- Hardly any caking of the material
- Improved mixing quality
- Easy and thorough cleaning
- Little wear
- Inexpensive wear part
- Robust construction
- Easy handling
- Minimal maintenance and cleaning effort
- Easily dismantled into individual parts for convenient transport
- Removable special mortar outlet
- Wall mortar and lightweight masonry mortar
- Facing mortar
- Scratch plaster
- Cement plaster
- Insulating plaster
- Screed mortar
- Tile and grout
- Adhesive and reinforcement mortar
- Leveling compound
- Rubbed plaster
- Lime plaster
- Renovation plaster
- Fine plaster
TECHNICAL SPECIFICATIONS
00020473
Mixing capacity:
30 l / min
Maximum grain size:
4 mm
Connection value:
230 V, 1 Ph, 50 Hz, 2.2 kW
Drive motor:
2.2 kW, 280 rpm
Mixing tube:
rubber mixing tube
Base:
fixed
Roles:
2 roles
Water connection:
Geka DN12 (1/2 ") - 2.5 bar operating pressure
Operation and control:
start / stop
Filling height:
1,000 mm
Container volume:
110 liters ~ 3.5 bags (30 kg each)
Spout height:
600 mm
Length / width / height:
1,870 / 600 / 1,040 mm
Total weight:
100 kg
Basic equipment package:
Water flow meter:
not included
Dosing shaft:
30 l / min
Booster pump:
not included
Connection cable:
not included
Water / air hose:
not included
Silo / container handover:
not possible