PFT G 4 gen25 400 V plaster

Mixing pumps—also known as plastering machines or mortar pumps—of the PFT G 4 type are suitable for all industrial dry mortars based on gypsum, lime, and cement. The material hopper is separated from the mixing and pumping unit. The G 4, which operates continuously and fully automatically, can be started and refilled at any time. It can be fed with bagged material or via the PFT SILOMAT pneumatic conveying system directly from a silo.

The PFT G 4 gen25 400 V plaster offers high output and long conveying distances for the mortar and can be combined with the entire range of PFT machines. Various versions are available, equipped with the appropriate rotor/stator precisely adapted to specific requirements.

• Easy cleaning – rubber mixing zone with interchangeable flange for D and R pumps
• Switches and connections are located within the main frame
• Reinforced substructure frame and strengthened wheel base
• Suitable for loading with a crane or forklift
• Large control panel – protected from dust and easy to maintain
• Simple, fast, and efficient feeding of the machine:
– from bags
– from the silo using the PFT SILOMAT pneumatic conveying system
• Trouble-free operation thanks to the large water filter
• Disassemblable into 2 parts (hopper assembly and main machine), reducing the transport height
• Flexible mortar mixing thanks to two water inlets
• Safe transport thanks to four handles with lifting mechanism
• Easy maintenance – water supply and pressure regulator are easily accessible

TECHNICAL SPECIFICATIONS

G 4 gen25 rp 400 V 3 Ph 50 Hz plaster

Part no. :

00867559

Performance :

Conveying output, max.:
60 l/min

Conveying distance up to:
30 m in DN25
50 m in DN35

Basic equipment :

Connection value:
400V/3ph/50Hz, C 25A all-pole

Drive:
6.05 kW, 400 rpm
2-stage gear box with inclination switch
0.75 kW, 28 rpm

Mixing tube:
Rubber mixing tube for D/R pumps
with bayonet coupling

Mixing shaft:
BIONIK G 4 Machine-applied plaster

Grout outlet with mortar pressure gauge:
DN35 female part

Wheels:
2 castors, 2 double-stop castors

Water connection:
Geka DN19 (3/4″) – 2.5 bar working pressure

Operation and control:
Main switch with rotary selector
Start/Stop (on the device | remote)
Mortar pressure reduction button
Water flow button
Manual star wheel operation | automatic automatic
Manual water pump operation | automatic

Dimensions :

Filling height:
910 mm

Hopper volume:
145 litres ~ 5 sacks (at 30 kg)

Length/Width/Height:
1,200/720/1,530 mm

Machine weight (up to pressure flange)
without accessories
~ 284 kg

Basic equipment package :

Pump unit:
D 6-3 TWISTER

Mortar hose:
RONDO DN25 10m
RONDO superlight flex DN25 5 m

Water pump for pressure boosting:
AV 1000

Water flow meter:
150 – 1,500 l/h

Air compressor:
COMP M-250, 400 V, 3 Ph, 50 Hz, 0.9 kW
250 l/min – max. 4 bar with pressure switch-off

Spraying gun/fine plastering device:
Spraying gun DN25-360° S14 200 Geka

Connection cable:
RED 5-32 A 25 m

Water hose/air hose:
Water hose 3/4″ Geka – 40 m
Air hose 1/2″ Ewo | Geka – 16 m

Level sensor:
retrofittable

G 4 gen25 r 400 V 3 Ph 50 Hz plaster

Part no. :
00867558